ACCELERATION OF HEAT EXCHANGE PROCESS OF SOLAR AIR HEATER
Article Sidebar
Main Article Content
Abstract
Solar air heater is the highly used heating device for industrial application and space heating this system is used to check the different types of ribs design on the absorber plate. The review for the solar air heater with the different ribs shows the result for the different rate of heat transfer through the absorber plate. This study shows the different shape of ribs on the absorber plate and their numerical analysis is done. In this paper the study is done for different design of ribs to suggest the best suitable design for the study of solar air heater
Article Details
Issue
Section
This work is licensed under a Creative Commons Attribution 4.0 International License.
How to Cite
References
D. Jin, M. Zhang, P. Wang, and S. Xu, ―Numerical investigation of heat transfer and fluid flow in a solar air heater duct with multi Vshaped ribs on the absorber plate,‖ Energy, vol. 89, pp. 178–190, 2015.
V. B. Gawande, A. S. Dhoble, D. B. Zodpe, and S. Chamoli, ―Experimental and CFD investigation of convection heat transfer in solar air heater with reverse L-shaped ribs,‖ Sol. Energy, vol. 131, pp. 275–295, 2016.
M. Nem and J. Kasperski, ―Experimental investigation of concentrated solar air-heater with internal multiple-fin array,‖ Renew. Energy, vol. 97, pp. 722–730, 2016.
N. K. Pandey, V. K. Bajpai, and Varun, ―Experimental investigation of heat transfer augmentation using multiple arcs with gap on absorber plate of solar air heater,‖ Sol. Energy, vol. 134, pp. 314–326, 2016.
A. S. Yadav and J. L. Bhagoria, ―A numerical investigation of square sectioned transverse rib roughened solar air heater,‖ Int. J. Therm. Sci., vol. 79, pp. 111–131, 2014.
N. S. Deo, S. Chander, and J. S. Saini, ―Performance analysis of solar air heater duct roughened with multigap V-down ribs combined with staggered ribs,‖ Renew. Energy, vol. 91, pp. 484– 500, 2016.
R. Karwa and K. Chauhan, ―Performance evaluation of solar air heaters having v-down discrete rib roughness on the absorber plate,‖ Energy, vol. 35, no. 1, pp. 398–409, 2010.
R. Nowzari, N. Mirzaei, and L. B. Y. Aldabbagh, ―Finding the best configuration for a solar air heater by design and analysis of experiment,‖ Energy Convers. Manag., vol. 100, pp. 131–137, 2015. Research Focus, Uzbekistan 100 www.ReFocus.uz RESEARCH FOCUS | VOLUME 1 | ISSUE 2 | 2022 ISSN: 2181-3833 ResearchBip (14) | Zenodo | Google Scholar | UIF (8.3)
A. K. Patil, ―Heat transfer mechanism and energy efficiency of artificially roughened solar air heaters—A review,‖ Renew. Sustain. Energy Rev., vol. 42, pp. 681–689, 2015.
A. Lanjewar, J. L. Bhagoria, and R. M. Sarviya, ―Heat transfer and friction in solar air heater duct with W-shaped rib roughness on absorber plate,‖ Energy, vol. 36, no. 7, pp. 4531–4541, 2011.
A. Acır and İ. Ata, ―A study of heat transfer enhancement in a new solar air heater having circular type turbulators,‖ J. Energy Inst., pp. 1–11, 2015.
T. Alam and M. H. Kim, ―A critical review on artificial roughness provided in rectangular solar air heater duct,‖ Renew. Sustain.
Energy Rev., vol. 69, no. July 2016, pp. 387–400, 2017. Research Focus, Uzbekistan 101 www.ReFocus.uz