METHODS OF INCREASING THE EFFICIENCY OF THE CONDENSER UNIT OF A THERMAL POWER PLANT (ANALYSIS OF THE OPERATION OF TPP CONDENSERS)

Article Sidebar

PDF (Uzbek (Latin))
Published: 2025-12-05
DOI: https://doi.org/10.66073/researchfocus.v4i11.1831
Keywords:
kondensator, aralash sovitish, vakuum, FIK, issiqlik elektr stansiyasi, vakuum darajasi, energiya samaradorligi, termodinamik tizim

Main Article Content

B. X. Yunusov
Islom Karimov nomidagi Toshkent Davlat Texnika Universiteti. Universitet Ko'chasi 2, Тоshkent. O’zbekiston
B.R. Mamadiyev

Abstract

This article analyses methods of optimising the performance of steam turbine condensers, which directly determine the efficiency of thermal power plants (TPP). The factors that adversely affect the main indicators of the condenser - the vacuum level and the heat transfer coefficient (fouling, air leakage) - have been studied. Practical recommendations are given on the basis of the scientific research of leading foreign scholars as well as our own research. According to the results of the analysis, the overall thermal efficiency of the plant can be increased considerably through a comprehensive approach.

Article Details

Issue

Vol. 4 No. 11 (2025): Research Focus International Scientific Journal. Volume 4, Issue 11 (2025)

Section

05.00.00 – Technical sciences
Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

How to Cite

METHODS OF INCREASING THE EFFICIENCY OF THE CONDENSER UNIT OF A THERMAL POWER PLANT (ANALYSIS OF THE OPERATION OF TPP CONDENSERS). (2025). Research Focus International Scientific Journal, 4(11), 65-68. https://doi.org/10.66073/researchfocus.v4i11.1831

References

Smith, J., Brown, A., & Wilson, R. (2018).Advanced Thermodynamic Analysis of Power Plant Condensers. Journal of Thermal Engineering, 45(3), 234-245.

Patel, R., & Verma, S. (2019).Multiphase Flow and Heat Transfer in Condenser Tubes. International Journal of Heat and Fluid Flow, 78, 108-119.

Zhang, H., et al. (2020).Nanostructured Surfaces for Enhanced Condensation Heat Transfer. Nano Energy, 75, 104-115.

Ivanov, S., & Petrov, D. (2021).Machine Learning Applications in Thermal Power Systems. Applied Energy, 285, 116-128.

Müller, F., & Schmidt, K. (2022).Sustainable Cooling Technologies for Power Generation. Renewable Energy, 189, 345-356.

Kim, J., & Lee, S. (2023).dvanced Materials for Heat Exchanger Applications. Materials Science and Engineering, 865, 144-155.